Hardware AtlasSupplier reference Explore in 3D

AVIATION / Avionics & electrical / REVIEWED 2026-09-11

D01Flight-deck displays & controls

Present flight information and accept crew inputs.

Manufacturers & products

Displays and control panels present information and accept crew commands. A complete cockpit upgrade also depends on sensors, computers, data buses and human-factors approval.

Program applicability is stated for each listing. 737NG, 737 MAX, and other aircraft examples are distinct configurations; listed products are not automatically interchangeable or approved for installation.

manufacturer

Collins Aerospace

AFD-2100 family / AFD-2120

Large-area cockpit LCD offering; the page body calls the unit AFD-2120 and lists the 737 MAX among its platforms. [2]

Program / application

737 MAX — documented; this page does not establish NG display fit [2]

Custom program inquiry

Contact the manufacturer or aircraft OEM for the applicable approved program and configuration. This is an inquiry route, not an assertion of stock, price or installation eligibility.

Product scope & qualifications

Source title says AFD-2100 while body says AFD-2120; confirm exact part number. A photo caption is not program evidence.

View product & inquiry route

manufacturer

Universal Avionics

InSight / EFI-1040

Integrated flight-display system with synthetic vision, charts, maps and radio controls. [3]

Program / application

Other retrofit aircraft; 737 applicability unverified [3]

Custom program inquiry

Contact the manufacturer or aircraft OEM for the applicable approved program and configuration. This is an inquiry route, not an assertion of stock, price or installation eligibility.

View product & inquiry route

manufacturer

Thales

ATR 72-600 cockpit / IAD68

Integrated cockpit with primary, multifunction and engine/warning display functions. [4]

Program / application

Other aircraft — ATR 72-600; no 737 applicability established [4]

Custom program inquiry

Contact the manufacturer or aircraft OEM for the applicable approved program and configuration. This is an inquiry route, not an assertion of stock, price or installation eligibility.

View product & inquiry route

manufacturer

GE Aerospace

Multipurpose control-display units

Provides keyed and touchscreen interfaces to its flight-management systems. [1]

Program / application

737NG and MAX — FMS/control-display platform table documented [1]

Custom program inquiry

Contact the manufacturer or aircraft OEM for the applicable approved program and configuration. This is an inquiry route, not an assertion of stock, price or installation eligibility.

View product & inquiry route

What remains unverified

An exact 737-800 display part-number/effectivity matrix and controlled panel dimensions were not established.

Where it comes from

A company address is shown separately from a published factory location. Request the manufacturing site and lot traceability for the exact part when sourcing.

What to compare

Display geometry · in / mm
Compare usable image dimensions separately from the bezel and mounting envelope.
Readability
Assess brightness, viewing angles, reflections and automatic dimming.
Function allocation
Identify primary, navigation, engine, standby and control-display roles.
Interfaces
Verify buses, video formats and supported sensor/computer revisions.
Reversion and redundancy
Evaluate information availability after a screen, bus or processor failure.
Power and cooling · W
Check electrical load, heat and rack/flight-deck airflow.
Human factors
Control placement, alerts and symbology must work within the approved cockpit.
Installation baseline
Confirm airframe effectivity, software versions and modification scope.

Selection & integration notes

Use 737NG-specific equipment evidence for the reference drawing; a MAX screen is an alternate program reference.

Published product examples

3 REFERENCES

Specifications belong to the named product and configuration.

AFD-2120 as described in AFD-2100 pageCollins Aerospace

Usable display area: 15.1 in[2]Manufacturer wording; exact diagonal/active-area definition should be confirmed.

Source naming mismatch is retained. MAX evidence must not be used to redraw an NG cockpit as if identical.

Example sources [2]

EFI-1040Universal Avionics

Bezel H × W: 9.86 × 7.86 in[3]Current InSight specification table.
Image H × W: 8.29 × 6.21 in[3]Active image dimensions; different from bezel.
Mass: 12.13 lb[3]EFI-1040 display, not the entire InSight installation.

Additional controllers and sensors add installed mass; no 737 approval is established.

Example sources [3]

ATR 72-600 IAD68 cockpitThales

Main LCD screens: 5[4]Manufacturer description of the integrated ATR 72-600 cockpit.

Installed system count, not an individual display dimension.

Example sources [4]

Sources & references

REVIEWED 2026-09-11

Manufacturer pages and technical documents support the linked claims. A review date is not a publication date or stock check.

Navigation and Guidance GE Aerospace · Publication date not stated
FMS, FMC and control-display units; explicit 737NG and MAX platform table.
Accessed 2026-09-10
AFD-2100 Adaptive Flight Display Collins Aerospace · Publication date not stated
Page body identifies AFD-2120, 15.1-inch area and MAX/other-platform use; title/body naming mismatch preserved.
Accessed 2026-09-10
InSight Display System Universal Avionics · Publication date not stated
EFI-1040 dimensions, image size, mass and display-system interfaces.
Accessed 2026-09-10
Thales technologies on board ATR 72–600 Thales · Publication date not stated
ATR 72-600 integrated cockpit, IAD68 screens, FMS and autopilot.
Accessed 2026-09-10